Connect VINT Hub

Connect the VINT Hub to your Getting Started Kit

Step 1

Add your VINT Hub and connect the red button cable to port 0 and the green button cable to port 5 as shown.

Step 2

Next, connect the red LED cable to port 1 and the green LED cable to port 4 as shown.

Step 3

Thread the USB cable through the hole at the back of the box.

Step 4

Connect the USB cable to the VINT Hub as shown.

Step 5 - Optional

There are two pairs of velcro in your kit. You can use one to attach the VINT Hub to your box at this time.